Knowledge

Incoloy 800, 800H, and 800HT belong to the same nickel-iron-chromium alloy family, developed by Special Metals Corporation beginning in the 1950s to d

Inconel 601 vs 310S: Oxidation Resistance at 1100°C for Furnace Radiant Tubes read more

A metallurgical comparison of UNS N07718 and UNS N07001, drawing on each alloy's own Special Metals technical bulletin to clarify the real temperature

Choose Monel 400 (UNS N04400) for caustic soda and for seawater, and Inconel 600 (UNS N06600) for high-temperature oxidation, deaerated high-purity st

This guide compares Inconel 625 tube against stainless steel, titanium, and copper-nickel across thermal conductivity, fouling resistance, and install

Inconel 718 (UNS N07718) is one of the most widely used precipitation-hardenable nickel-chromium superalloys in the aerospace, oil and gas, and power

This article gives the design S-N data, the standards (DNVGL-RP-F112, API 2RD, ASME VIII-2, IIW FAT classes), the environmental corrections, and the E

Inconel 625 overlay welding is the process of fusing a thin, corrosion-resistant nickel-chromium-molybdenum layer onto lower-cost carbon steel pipe or

A thermocouple protection tube has one job that sounds simple and turns out to be genuinely demanding: shield a delicate temperature sensor from a fur

A process-metallurgy reference for UNS N07718 forging practice, drawing on Special Metals' own hot-working and heat-treatment data to explain how forg

Sour gas wells — reservoirs rich in hydrogen sulfide (H₂S) — are among the most punishing environments in all of materials engineering. The H₂S reacts

Inside every pressurized water reactor (PWR) steam generator sit thousands of thin-walled tubes — a typical large unit contains over 7,000 U-tubes. Ea