Monel 400 Flange

JN ALLOY supplies Monel 400 SO flanges, Monel 400 WN flanges, UNS N04400 blind flanges, 2.4360 Monel 400 plain flanges, ASTM B564 UNS N04400 SW flanges, Monel 400 spectacle blind flanges, Monel 400 threaded flanges, 2.4360 spacer ring,UNS N04400 paddle blind/blank, Monel 400 bleed/test/drip ring, Monel 400 reducing flange.

Flanges are used to connect 2 pipes or to end a pipe. They can be made up of different materials depending upon the application that they are intended to be used in. Monel 400 Flanges is one such type of flange that is made up of monel 400 grade that is an excellent high performance alloy used in high pressure application. Monel Alloy Flanges offer resistance to alkali and acidic environments. Monel 400 Pipe Flangesare said to exhibit good performance in temperature ranging from sub zero to 1000 degrees F. cold working process is used to harden the ASTM B564 UNS N04400 Pipe Flange. Monel 400 Flanges are made up of a nickel copper super alloy that is corrosion resistant and strong. The material could be welded easily and formed well. There are different pressure classes of these flanges ranging from Class 150 Monel UNS N04400 Flanges to class 2500, and PN6 to PN64. The classes define the pressure capacities. The monel 400 flanges have 63% nickel and 28% copper in the composition which makes them stronger. The minimum yield strength of the material is at 195MPa and the minimum tensile strength is 480MPa. There are different standards to cover the different nominal bore sizes of the flanges.

Jinie Technology (Jiangsu) Co., LTD is a manufacturer, trader, stockist, supplier and exporter of ASTM B564 Monel 400 Flanges that are made from pure Nickel, alloyed with Copper and other metals, giving it a durable nature and the prowess to function under a host of corrosive services. We offer UNS N04400 Monel 400 Flanges that have a good economic value owing to its tendency of remaining neutral to corrosive fluids, making them reusable. Alloy 400 is highly regarded as one of the best performing engineering alloys. Aside from having superior resistance to corrosion, the primary resistance of Monel 400 Flanges is best suited to Alkylation units. Concentrated acids such as hydrofluoric acid and sulfuric acid are used in these units in the petrochemical industry to convert alkenes to alkylate. Both sulfuric acid as well as hydrofluoric acid are highly corrosive solutions and can easily corrode metals, without good resistance to reductive agents. But since the chief alloyant in the ASTM B564 UNS N04400 Flange is nickel, the resistance to these particular reductive solutions is strong. In fact, in comparison to nickel, the corrosion resistance properties of UNS N04400 Flange tend to be much higher than nickel itself.

Material: ASTM B564 Standard Specification for Nickel Alloy Forgings

Standard: ASME B16.5, ASME B16.47, DIN, EN, BS, JIS

Size: 1/2"-48", DN6-DN400

Class: 150#,300#,400#,600#,900#,1500#,2500#

Marine fixtures, pumps, valves and piping systems for sea water applications

Chemical plant equipment

Aerospace applications

Musical instruments

Heat exchangers

High pressure applications

Offshore applications

Onshore applications

Welded pressure vessels for the storage of cryogens