ASTM A815 UNS S31803 Elbow

JN ALLOY supplies stainless steel UNS S31803 90 Degree Elbow, DIN 1.4462 45 Degree Elbow ASTM A815 WPS31803 End Cap, Grade S31803 5D Elbow, Duplex Steel S31803 Pipe Fitting, Duplex Steel 2205 Long Radius Elbow, ANSI B16.9 S31803 Short Radius Elbow.

Elbow is used to change the direction of the pipe. However, it will stretch and thin out the outer walls of the pipe. It will also thicken the inner wall of the pipe. S31803 duplex stainless steel elbow are renowned for having austenitic and ferritic microstructures. They display the properties of both classes.

Improved localized corrosion resistance is displayed by ASME SA815 S31803 Duplex Steel Butt Weld Pipe Fittings when compared to 316 and 317 grades. ASTM A815 UNS S31803 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content. It protects them from corrosion. These pipes tend to become brittle at a temperature exceeding 300 degrees C. Duplex UNS S31803 Pipe Elbow displays a tensile strength of 1,16,000 psi 800 MPa and yield strength of 80,000 psi 550 MPa.

Ordinary steel fittings are sensitive to chloride stress corrosion cracking. However, ASME SA815 Duplex Elbow are better as they restrain deformities and avoid corrosion cracking even under high temperatures. UNS S31803 Duplex Steel Elbow is said to have amazing toxic resistance and elasticity due to which they are used in the gas desulfurization industry. WERKSTOFF NR. 1.4462 End Cap have high resistance to intergranular corrosion and are therefore used in terminating connections. Duplex S31803 Stainless Steel Buttweld Elbow is used in desalination, Boiler manufacturers, and brewing tanks. They are usually lower in cost and have a lower percentage of alloying elements. They are available in ASTM A 815. A812, and ASME SA 815, SA 812 specifications. We at Jinie Technology (Jiangsu) Co., LTD provide Duplex 2205 Elbow as per the specific requirements of our customers in various sizes and with different pressure ratings. Customer satisfaction is our top priority. Also, we are one of the few manufacturers in India that can weld, form, and bend these duplex stainless steel S31803 Elbow in different sizes and shapes.

Off-Shore Oil Drilling Companies

Power Generation

Petrochemicals

Gas Processing

Specialty Chemicals

Pharmaceuticals

Pharmaceutical Equipment

Chemical Equipment

Sea Water Equipment

Heat Exchangers

Condensers

Pulp and Paper Industry

Material Testing:

We at Ganpat Industrial Corporation ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area

• Hardness Test

• Chemical Analysis – Spectro Analysis

• Positive Material Identification – PMI Testing

• Flattening Test

• Micro and MacroTest

• Pitting Resistance Test

• Flaring Test

• Intergranular Corrosion (IGC) Test